Andrew ES45T Manuel d'utilisateur télécharger pdf (Page 18)

Step 10

Step 11

Step 12

Use a carpenter’s level to level support assembly as indicated in Figure 12. Loosen U-

bolts to move support assembly up or down as needed to achieve level surface.

Installation Procedures

Figure 13

Figure 12

Tighten anchor bolts on rear pads and azimuth axis support base plate down using A-

325 procedure. See A-325 procedure for technique. (see page 12)

Loosely attach elevation strut (P/N 49766) to azimuth axis joint (P/N 300746) as shown

in Figures 13 and 14.

• Use ¾ x 3-½ in. bolt, lockwasher and nut

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 80 81

Pas de commentaire

Andrew ES45T Manuel d'utilisateur Page 18