Andrew ES45T Manuel d'utilisateur télécharger pdf (Page 34)

Step 4

Step 5

Installation Procedures

Loosely attach support angles (P/N 49436) to three tee plates (P/N 202447) as shown in

Figure 37.

• Use A-325 ½ x 1-¼ in. bolts, flatwashers and nuts. (see page 12)

• Install bolts from concave side of reflector

• Angles should be installed with edge in and flat side away from reflector as shown.

Figure 37

Loosely attach support angles (P/N 49438) from plates E and A to angle (P/N 49436)

from tee plate F with pivot bracket (P/N 300758) as illustrated in Figure 38.

Figure 38

ES45T-R Reflector Assembly

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 80 81

Pas de commentaire

Andrew ES45T Manuel d'utilisateur Page 34