Andrew ES45T Manuel d'utilisateur télécharger pdf (Page 19)

Step 13

Installation Procedures

Figure 14

Determine required length of elevation strut to nearest degree increment of desired ele-

vation setting as specified in the Elevation and Azimuth Adjustments Section. Adjust

coarse setting by extending secondary and, if necessary, tertiary sections to length.

Install eight ½ in. set screws and securely tighten as pictured in Figure 15.

CAUTION: Do not extend secondary or tertiary struts into red warning areas.

Figure 15

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 80 81

Pas de commentaire

Andrew ES45T Manuel d'utilisateur Page 19