Andrew ES45T Manuel d'utilisateur télécharger pdf (Page 36)

Reflector-to-Mount

Assembly

(With Crane)

Step 1

Step 2

Installation Procedures

This reflector can be installed on the mount manually or by using a crane. However,

Andrew recommends that this procedure be performed using a crane.

The following steps provide the procedure for installing the reflector to the mount using

a crane.

Ensure all connections on reflector and back structure are tight.

Wrap crane straps around support angle between pivot brackets as illustrated by Figure

41.

• Hoist reflector slightly off ground to remove diameter setting bands

• Reattach hardware through edge joining plates

Figure 41

ES45T-R Reflector Assembly

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 80 81

Pas de commentaire

Andrew ES45T Manuel d'utilisateur Page 36