Andrew ES45T Manuel d'utilisateur télécharger pdf (Page 69)

Step 1

While viewing the spectrum analyzer screen, a pure noise signal as shown in Figure 1

will probably be observed. Additionally, some transponder signals may be observed

above the noise signal as shown in Figure 2.

Figure 1

Figure 2

The following steps provide the procedure for acquiring a satellite.

Manually move the antenna in the azimuth (scanning back-and-forth) to achieve the

maximum (greatest amplitude) transponder signals.

• Scan in one direction until the amplitude continues to diminish and then scan in the

opposite direction until the same condition occurs.

•

Return to the position yielding the greatest amplitude.

Operation

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 80 81

Pas de commentaire

Andrew ES45T Manuel d'utilisateur Page 69